Unscrewing ejection closure mould

Unscrewing ejection closure mould basic spec. is as bellows, SINO-PK

• Unscrewing ejection closure mould cavity steel:l

Stavax S420 made in Sweden, stainless, heat treatment with HRC50±2

• Unscrewing ejection closure mould core steel:l

DIN 1. 2083 made by Thyssen Krup German, stainless heat treatment with HRC48±2.

• Unscrewing ejection closure mould stripper and slides steel:l

DIN 1. 2316 made by Thyssen Krup German, stainless heat treatment with HRC55±2.

• Unscrewing ejection closure mould A/B/C plate steel:l

718 steel made by Shanghai Bao steel, prehardened with HRC35±2, Nickel plating is available.

• Unscrewing ejection closure mould other plate steel:l

P20 steel made by Shanghai Bao steel, prehardened with HRC30±2. Nickel plating is available.

• Unscrewing ejection closure mould guiding system steel:l

SKD 61 made in Japan with HRC61±2.

• Unscrewing ejection closure mould durable parts material:l

Durable copper with lubrication graphite inserted.

• Unscrewing system material:

SKD 61 for gear, gear liner, gear rack, tubular sleeve with the heat treatment to the inside of the steel hardness with HRC 40 to 45 and surface hardness more then HRC 60.

• Unscrewing ejection closure mould hot runner system:l

Anole hot runner system professionally design for small volume injection hot nozzle, with the temperature controlling system. Heating elements and thermocouples are made in German.

• Unscrewing ejection closure mould water connectors:l

Nozzle connectors with the water channel on the plate diameter 16mm, water nipple measured up with D.M.E 3/4 B.S.P standard, connected with one stainless water manifold.

• Unscrewing ejection closure mould cavities Nr.:l

 Unscrewing ejection closure mould cavities Nr. from 2 cavities to 72 cavities.lSINO-PK

• Unscrewing ejection closure mould cycle time:l

 Unscrewing ejection closure mould (standard Unscrewing drive by gear rack plastic closure mold) cycle time from 5 to 20 seconds if the cavities Nr. from 2 to 72 cavities.

• Unscrewing ejection closure mould stocked standard components:l

• -standard screw neck
• -hot runner nozzle
• -heating elements
• -thermocouples
• -valve pins
• -wire plugs
• -durable pcs
• -water nipples
• -water manifolds
• -ejector connectors
• -o-ring
• -copper water pipe of the cores
• ......

• Unscrewing ejection closure mould components spare quantity:l

Core, cavity, stripper inserts, hot runner nozzle's standard spare is 12.5 to 25% based on the cavities nr. of the closure mould.

• Unscrewing ejection closure mould production safety devices:l

Stroke switches and electric eyes.

• Unscrewing ejection closure mould ejection way:l

by the machine knock out.

• Unscrewing ejection closure mould cooling water:l

 Unscrewing ejection closure mould cooling water need 8 to 15 centigrade degree soft water.l

• Unscrewing ejection closure mould cavities C-C distance:l

 Unscrewing ejection closure mould X and Y C-C distance.l As min. as possible for

• Closure weight tolerance:

 Unscrewing ejection closure mould size and shape.l0.1% to 0.25% based on the