Unscrewing drive by gear rack plastic closure mould

SINO-PK Unscrewing drive by gear rack plastic closure mould basic spec. is as bellows,

•  Unscrewing drive by gear rack plastic closure mould cavity steel:

  Stavax S420 made in Sweden, stainless, heat treatment with HRC50±2

•  Unscrewing drive by gear rack plastic closure mould core steel:

  DIN 1. 2083 made by Thyssen Krup German, stainless heat treatment with HRC48±2.

•  Unscrewing drive by gear rack plastic closure mould stripper and slides steel:

  DIN 1. 2316 made by Thyssen Krup German, stainless heat treament with HRC55±2.

•  Unscrewing drive by gear rack plastic closure mould A/B/C plate steel:

  718 steel made by Shanghai Bao steel, prehardened with HRC35±2, Nickel plating is available.

•  Unscrewing drive by gear rack plastic closure mould other plate steel:

  P20 steel made by Shanghai Bao steel, prehardened with HRC30±2. Nickel plating is avaialble.

•  Unscrewing drive by gear rack plastic closure mould guiding system steel:

  SKD 61 made in Japan with HRC61±2.

•  Unscrewing drive by gear rack plastic closure mould durable parts material:

  Durable copper with lubrication graphite inserted.

•  Unscrewing system material:

  SKD 61 for gear, gear liner, gear rack, tubular sleeve with the heat treatment to the inside of the steel hardness with HRC 40 to 45 and surface hardness more than HRC 60.

•  Unscrewing drive by gear rack plastic closure mould hot runner system:

  Anole hot runner system professionally design for small volume injection hot nozzle, with the temperature controlling system. Heating elements and thermocouples are made in German.

•  Unscrewing drive by gear rack plastic closure mould water connectors:

  Nozzle connectors with the water channel on the plate diameter 16mm, water nipple measured up with D.M.E 3/4 B.S.P standard, connected with one stainless water manifold.

•  Unscrewing drive by gear rack plastic closure mould cavities Nr.:

  SINO-PK Unscrewing drive by gear rack plastic closure mould cavities Nr. from 2 cavities to 72 cavities.

• Unscrewing drive by gear rack plastic closure mould cycle time:

  Unscrewing drive by gear rack plastic closure mould (standard Unscrewing drive by gear rack plastic closure mould closure mould) cycle time from 5 to 20 seconds if the cavities Nr. from 2 to 72 cavities.

•  Unscrewing drive by gear rack plastic closure mould stocked standard components:

   

  • -standard screw neck
  • -hot runner nozzle
  • -heating elements
  • -thermocouples
  • -valve pins
  • -wire plugs
  • -durable pcs
  • -water nipples
  • -water manifolds
  • -ejector connectors
  • -o-ring
  • -copper water pipe of the cores
  • ......

   

•  Unscrewing drive by gear rack plastic closure mould components spare quantity:

  core, cavity, stripper inserts, hot runner nozzle's standard spare is 12.5 to 25% based on the cavities nr. of the closure mould.

•  Unscrewing drive by gear rack plastic closure mould production safety devices:

  Stroke switches and electric eyes.

•  Unscrewing drive by gear rack plastic closure mould ejection way:

  by the machine knock out.

•  Unscrewing drive by gear rack plastic closure mould cooling water:

  Unscrewing drive by gear rack plastic closure mould cooling water need 8 to 15 centigrade degree soft water.

•  Unscrewing drive by gear rack plastic closure mould cavities C-C distance:

  As min. as possible for Unscrewing drive by gear rack plastic closure mould X and Y C-C distance.

•  Closure weight tolerance:

  0.1% to 0.25% based on the Unscrewing drive by gear rack plastic closure mould size and shape.